If you've been considering installing a Wood Entry door, you've come to the right place. We'll cover the steps to properly install your door, as well as some tips and tricks that will help you get the job done correctly. Before you purchase and install your door, be sure to check your measurements so you know exactly how much space you need to allow for the door. In addition to measuring your space, you should take a look at the frame of the door, too, because it might not line up with the rest of the house.
When selecting a solid wood door for your entryway, keep in mind that it will hold up best in covered areas. The roof will need to project at least half the height of the door (including the sill) and be about five feet above the landing. The roof must also be at least one and a half times the width of the door. If you plan on installing an overhead window, you'll need to take special measurements to ensure that the entire door will fit in the space.
A quality wood entry door can cost anywhere from $3,000 to $5,000. Depending on the size and type of door, you can save money by using salvaged wood. Salvaged doors may be $300 or more, and you'll have to strip them before installing them. Alternatively, you can purchase a slab of wood for around $700 and save yourself some money. If you're worried about the installation process, you can also cut the door to fit the opening. You may need to cut one inch off the top and bottom rails and two inches off the sides.
When choosing an installer, keep in mind that Homewyse estimates are NOT substitutes for written quotes from reputable trade professionals. You'll also need to consider the labor costs, materials and equipment delivery, and protection of the worksite. The price of a Wood Entry door installation also includes any additional charges that will be required to modify an existing system. A quality professional will also give you tips on how to maintain and operate your new door.
Another tip for choosing the right door is to ask if installation fees are included. If you don't, you'll end up spending more money on installation, which is the last thing you want! If you can reuse your old door frame, you'll save money as well as energy efficiency. But remember to make sure you have enough space for the door. You'll be happy you did! If you're not sure about where to buy the door, don't wait any longer!
Whether you choose fiberglass or wood, the cost of Wood Entry door installation depends on a number of factors, including the size of the project, the condition of your existing doors, and the options you choose. Make sure you compare the prices of different options and the quality of the door before committing to an installation. Once you've made the decision, you can start planning for the project. The process of installation will be much easier and less expensive than you might have imagined.
Depending on your budget and skill level, you can choose between a pre-hung exterior door or a full-frame front door. While the latter type of installation requires more time, it is worth the effort. A full-frame front door will give you the freedom to customize the design, and will be more secure because of its sturdy frame. It also adds more character to your entryway. You can make it wider or taller to accommodate the new door.